Two zone fixes.
helper-manager: the contextual HUD only rendered for tools with `def.toolHints`,
so zone (none) showed no HUD and no snapping chip even though it resolves a snap
context. Render the generic RegisteredToolHelper whenever the tool has hints OR a
snap/continuation context; hoist the legacy `roof` RoofHelper above it so the new
fallback doesn't capture it. Any snappable hint-less draft tool now advertises
Shift = cycle.
zone-tool: a not-yet-migrated legacy tool — it used Shift as a snap bypass and
applied `gridSnapStep` unconditionally, so Off mode still snapped to grid.
Migrated to the mode-driven exclusive-modes convention (zone resolves to the
'wall' context): grid quantize gated on isGridSnapActive(), 15° ray gated on
isAngleSnapActive(), Off/Lines leave the raw cursor. Dropped the Shift-bypass and
its key listeners — Shift now cycles the mode globally. Recorded as migrated in
the review skill's known-legacy list.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix: zone grid snapping, shelf position panel, deselect on item placement
- Zone tool reads the editor's gridSnapStep (0.5/0.25/0.1/0.05) instead
of a hardcoded 0.5 for both cursor move and click snapping.
- Shelf inspector gains a Position group (vec3 X/Y/Z sliders), matching
the item panel.
- Item catalog clears the viewer selection before arming placement so
shortcuts (rotate & co) don't hit both the ghost and the selected node.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: move level display naming into @pascal-app/core
getDefaultLevelName / getLevelDisplayName ("Ground Floor" / "Floor N" /
"Basement N") lived in packages/editor's internal lib, so viewer-only
surfaces couldn't reach them and fell back to hand-rolled "Level N"
labels. The helpers are pure domain logic, so they move to core and
export from its barrel; the editor package's seven call sites now import
them from there.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Add roof surface placement support for items
Items (e.g. solar panels) can now be placed on sloped roof surfaces.
The placement system computes euler rotation from the roof surface
normal so items sit flush on the slope instead of going inside.
- Add roofStrategy to placement-strategies with enter/move/click/leave
- Wire roof:enter/move/click/leave events in the placement coordinator
- Add calculateRoofRotation in placement-math using surface normals
- Support full 3D cursor rotation for sloped surfaces
- Items on roofs are parented to the level with world-space rotation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fixed conflict
* Snapshot: ridge vent locks to segment ridge during placement, free sliders after
Placement tool clamps the cursor to the segment's ridge line for all roof
types (gable, hip, shed, gambrel, dutch, mansard; flat rejected). Renderer
re-derives Y from the live surface plus a small lift, and treats stored
position[1] / position[2] as user offsets so the inspector sliders move
the vent after placement.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(roof): contribute outer silhouette to alignment-guide candidates
Roof has no centred-box footprint (it's the union of its `roof-segment`
children) so the capability bridge needs the resolved AABB directly. We
build it from the children's corners in roof-local space, then transform
to world coords. Roofs only contribute as static candidates — the
move-roof tool drives them by origin, so the relocatable-box path never
applies.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(floorplan): upright text geometry that stays horizontal under scene rotation
Floor-plan text labels were rotating with the 90° default scene rotation,
making zone names read sideways. Add an `upright` flag to text geometry:
when set, the registry layer counter-rotates the label by sceneRotationDeg
around its anchor so it reads horizontally on screen. Zone labels opt in.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(editor): redesign material-paint cursor badge and gate floor-plan paint mode
Paint cursor swaps the inline icon+label chip for a stacked badge — a
glowing accent stem pointing down to the hit point with the paint icon
above — so the cue reads as "pointer" rather than "tooltip". Switches
the accent to indigo. The 2D floor-plan now also shows the paint-icon
overlay and routes pointer interactions to the painter when in
material-paint mode.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(editor): 90° rotate action on the floating building menu
Adds a Rotate button to the building action menu (and a generic `onRotate`
slot to NodeActionMenu). Each click rotates the building 90° CW around
its world-bbox center, mirroring the offset compensation
`MoveBuildingContent` uses during R/T-rotate drags — so the building
spins in place instead of orbiting its (often off-centre) origin.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(column,shelf): show cursor sphere during placement preview
Matches the placement affordance other floor-placed tools already have
so users see the snap point as a discrete dot alongside the ghost mesh.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* chore(ifc-converter): update next-env types path to .next/dev/types
Next.js moved generated route types under `.next/dev/types/` — regenerate
the reference so the type-check resolves them again.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(ridge-vent): track parent segment's live overrides for real-time follow
While dragging a roof-segment resize handle (width / depth / pitch /
wallHeight / rotation), the new dimensions stream through
useLiveNodeOverrides and only flush to the store on release — so the
ridge vent was snapping to the new ridge only after the drag ended.
Merge segment overrides into the renderer's segment view so the vent
rides the resize in real time.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(editor): step building rotation in 15° increments
Cuts the floating building menu's rotate-step from 90° to 15° so each
click nudges the building rather than slamming it to the next cardinal.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(editor): world-frame alignment guides and grid snap under building rotation
Brings the 2D floor-plan alignment + grid behaviour in line with 3D so
guides and snap follow the world XZ grid regardless of how the active
building is rotated.
Core: adds resolveAlignmentInBuildingWorld + snapWorldXZToBuildingLocal,
plus a shared BuildingPose type, so callers can resolve in world space
while staying in building-local coords downstream.
Editor: introduces packages/editor/src/lib/world-grid-snap.ts as the
single entry point for tools that need world-frame alignment / grid
snap (resolveAlignmentForActiveBuilding, getActiveBuildingPose,
snapWorldXZForActiveBuilding, snapBuildingLocalToWorldGrid). Honours
useLiveTransforms and resolves the active building via level.parentId
first so the helper stays in sync with the floor-plan panel.
Alignment store unification: applyFloorplanAlignment and the registry
move overlay now publish guides in world XZ — the same frame the 3D
tools already use — so the shared useAlignmentGuides store carries one
consistent coordinate system. The 2D layer renders world XZ via the
fixed world → SVG transform (a 90° rotation around the building's
world position; independent of building rotation), so guides come out
parallel to the world-axis-aligned floor-plan grid in every case.
Drafting + move sessions across walls, fences, slabs, ceilings,
columns, items, shelves, roofs, stairs, zones and elevators are
re-routed through the new helpers so cursor placement, grid snap,
draft endpoints, and move commits all land on the world XZ grid
even when the building has been rotated.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* revert(editor): drop building drag-rotate and grid building-XZ chase
Two behaviours added recently were causing the world grid to slide
around during building edits. Reverts both, keeping the rest of the
world-frame alignment work intact.
- floating-building-action-menu / node-action-menu: roll the rotate
button back to a single click that increments rotation by 15°
around the bbox center (state at 3eb02fde). The drag-rotate from
b50c0d5a streamed live position updates per frame, which the
floor plan and grid both followed.
- grid: stop chasing the active building's world XZ each frame
(pre-c00a2469 behaviour). The grid stays anchored at world (0, 0)
so it doesn't visibly sweep when the building origin moves —
during a drag, an R/T rotation in the move tool, or a click
rotate that re-anchors the origin to the bbox-pivot. Y still
lerps to the active level's floor height.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(editor): consistent building rotation pivot + 2D position sync
Several connected fixes to building rotate/move so the 3D mesh, the
2D floor plan, and alignment guides all stay visually consistent
across rotations and drags.
Rotation-invariant pivot
- New `getBuildingLocalBboxCenter` helper walks descendant mesh
geometry bounds in the building's LOCAL frame, returning a
centroid that doesn't depend on the building's current world
rotation. The previous approach derived the pivot from the world
AABB at the current rotation, which made the local pivot subtly
drift each time the building was rotated.
- Floating menu click-rotate and move-tool R/T rotation now seed
their pivot from this helper, so successive rotations stay
pinned at the same world point.
Move-tool stability
- R/T rotation always pivots around the current world bbox center,
even before the cursor has moved onto the grid (previously it
fell back to rotating around the origin in that case).
- Commit (`onGridClick`) now writes the mesh's actual on-screen
pose instead of recomputing it from the click event's grid
coords, removing a one-cell snap on release.
Alignment resolver
- Tie-break is now perp-first, primary-second. The previous order
was reliable when wall faces shared an exact axis-aligned coord
(pre-rotation), but post-rotation float deltas meant primary
never tied and the resolver could lock onto the far corner of a
candidate. Perp-first picks the visually closest point.
2D ↔ 3D sync
- The floor-plan SVG scene group now applies a live `translate(...)`
derived from `(committedBuildingPosition → live buildingPosition)`,
in addition to the existing live rotation. Building-local content
slides in lockstep with the 3D mesh during a drag.
- The alignment-guide layer projects from world XZ using the
COMMITTED building position, so guides stay locked to their world
coordinates while the building slides past them.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* Merge remote-tracking branch 'origin/main' into fix/fir-5-june
* feat(wall): alt-click commits a single wall instead of chaining
Holding Alt on the click that completes a segment now stops drafting
instead of starting a new segment from the just-placed endpoint. Same
behaviour wired in both the 3D wall tool and the 2D floor-plan
placement hook (which already passed `singleWall: event.altKey` —
the 2D handler was ignoring the flag).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* revert(editor): drop 15° rotate from floating building action menu
Removes the rotate button on the floating building menu and the
`getBuildingLocalBboxCenter` pivot helper that only existed to support
it. The selected-group rotate handle remains the way to rotate a
building.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* chore(ifc-converter): point next-env at .next/types instead of .next/dev/types
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(editor): unify 3D move grip with floating-menu Move via tap-to-engage
The translate gizmo on the 3D bounding box now hands the node to the
registry move tool (same path as the floating action menu's Move
button) instead of running its own plane-drag. One move flow — green
bounding box, cursor follow, alignment guides, R/T rotation,
click-to-commit — drives both entry points.
Adds a `dragBounds` capability on the node registry so kinds whose
rendered mesh contains extras (per-level landing assemblies on an
elevator, etc.) can declare the box the user thinks of as "the thing
being dragged." Elevator and stair opt in; everything else still
auto-measures. `MoveRoofTool` now shows the green box for whole-stair
and whole-roof moves, and aligns roofs by their footprint corners
(previously only stairs did). Slab floor-plan moves clear
`autoFromWalls` on commit so space-detection doesn't snap the slab
back, via a new `extraCommitFields` hook on the polygon-centroid
move target.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(editor): 2D alignment guides in building-local frame + world-grid wall snap
The 2D floor-plan alignment layer now mounts inside the rotated scene
<g> and reads from an editor-local `useAlignmentGuides` store —
guides are stored in building-local meters and follow the SVG
transform that already carries the rest of the floor-plan geometry.
Pill labels are counter-rotated by the scene rotation so they stay
upright under building rotation. The 3D pipeline keeps its own
world-frame store; the two surfaces no longer share frames.
Wall drafting picks up an optional `gridSnap` override so the 2D
floor-plan can snap drafts onto the world-XZ grid even when the
active building is rotated — without it, a rotated building's
drafted wall would chase the local grid and miss the visible lines.
`snapPointTo45Degrees` and `snapWallDraftPointDetailed` route through
the override when supplied; otherwise the prior local-axis grid snap
is unchanged. The floor-plan panel wires `snapBuildingLocalToWorldGrid`
through the placement hook and exports `WALL_GRID_STEP` to support it.
Also fixes the minor/major grid stroke palette swap so minor lines
render with the minor palette and majors with the major palette.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* chore(editor): drop dead onRotate slot, memoize dragBounds snapshot
Removes the unreachable `onRotate` prop, `RotateCw` import, and
rotate button from `NodeActionMenu` — its only caller was the
floating building menu's 15° rotate, which was removed in d65fd5fe.
Memoizes `MoveRegistryNodeTool`'s `dragBounds` lookup so it captures
the scene snapshot once per node instead of re-reading
`useScene.getState().nodes` on every render. Bounds depend only on
`node` (locked for the tool's lifetime) and start-time sibling state
(elevator shaft height from the level set), so a one-shot snapshot is
the right semantics — and it avoids implying a live subscription that
isn't there.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* chore: biome check --write (import order, formatting, unused import)
Auto-fixes from `bun check:fix`:
- import-order normalization in editor/nodes/core
- unused `snapToGrid` / `useLayoutEffect` imports dropped
- minor whitespace/wrapping tweaks
No behavioural change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* wip sfx
* wip audios
* feat(editor): structure build-start/end cues + menu hover/click SFX
Sound design pass for the build/items experience:
- Split structure-build into a start cue (draft begins) and end cue
(commit). Wall/fence fire start on the first click; slab/ceiling/zone
tick start on every non-closing vertex; roof on the first corner.
- Doors and windows now use the structure-end cue on place + move;
shelves use item-place instead.
- New menu_hover (round-robin retired in favour of a single sample) and
menu_click cues wired to the Build/Items main categories, item-catalog
tiles, the icon rail / tab bar, and the bottom action menu (via the
shared ActionButton).
- Refresh item_pick / item_place / item_rotate samples; drop the
now-unused numbered menu_hover variations.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(editor): silence forEach return lint in updateSFXVolumes
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore(editor): convert SFX wavs to mp3 to shrink assets
Re-encode all SFX samples as 128kbps mp3 (~94% smaller, transparent for
short UI cues) and point the player at the .mp3 sources. Drops the .wav
originals; the freshly converted item_pick/place/rotate.mp3 override the
older committed mp3s.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Wholesale swap of packages/{core,viewer,editor,mcp} and apps/editor with the
versions from the private editor repo, which is the production source of truth.
Setup changes:
- packages/{core,viewer,editor} versions held at 0.7.0 baseline (matching
the most recent published release) so a bump=minor publishes 0.8.0
- packages/mcp held at 0.1.1 (never published; first publish will go through
the new release.yml flow)
- peerDependencies and devDependencies for inter-package @pascal-app/*
references pinned to ^0.7.0 instead of '*' / 'workspace:*' so they are
valid for npm consumers
- Root package.json: TypeScript bumped to 6.0.2, added overrides for
@types/react, @types/react-dom, @types/three to prevent JSX namespace
fragmentation across the workspace
- release.yml extended to also publish editor and mcp; 'both' option renamed
to 'all'; added a sync step that updates inter-package peerDeps/devDeps to
match the new versions on every bump (so viewer/editor/mcp tarballs always
reference the version of core they were built against)
- Root scripts gained release:editor and release:mcp shortcuts
Verification:
- bun install --frozen-lockfile is consistent
- packages/{core,viewer,mcp} build cleanly, dist/index.d.ts emitted
- packages/editor check-types reports 21 pre-existing errors, identical to
what private-editor currently reports
Open PRs against editor-v2 will need rebasing/conflict resolution.
Sync monorepo PRs #243 and #248 to the open-source editor.
Move/Rotate Building:
- New move-building-tool with grid snapping, R/T rotation, and Esc cancel
- Floating building action menu with move button
- Building helper with keyboard shortcut hints
- BuildingRenderer now applies position and rotation from node data
Building-Relative Coordinate System:
- GridEvent gains localPosition (building-local coords)
- use-grid-events computes building-local intersection from building mesh
- ToolManager wraps building-relative tools in a building-local <group>
- All tools (wall, slab, ceiling, stair, roof, zone, polygon-editor,
placement coordinator) updated to use event.localPosition
- Placement coordinator adds worldToBuildingLocal helper for cursor
position conversion
2D Floorplan Fix:
- SVG layers wrapped in <g transform=rotate(...)> for building rotation
- Pointer-to-plan conversion un-rotates when building is rotated
- Grid events from 2D include localPosition
Store Changes:
- useEditor movingNode union includes BuildingNode
- NodeActionMenu onDelete is now optional (buildings can move but not delete)
Wassim SAMAD