* Add roof surface placement support for items
Items (e.g. solar panels) can now be placed on sloped roof surfaces.
The placement system computes euler rotation from the roof surface
normal so items sit flush on the slope instead of going inside.
- Add roofStrategy to placement-strategies with enter/move/click/leave
- Wire roof:enter/move/click/leave events in the placement coordinator
- Add calculateRoofRotation in placement-math using surface normals
- Support full 3D cursor rotation for sloped surfaces
- Items on roofs are parented to the level with world-space rotation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fixed conflict
* Fix spiral stair openings and fence handle arrows
* Implement roof trim planes and ridge vent clipping
* Fix mansard roof and ridge vent placement
* Fix mansard merged roof cutouts
* Fix Dutch roof gable overhang
* Refactor roof segment, ridge vent, and surface geometry
Remove Dutch ridge axis abstraction and rework roof edit system,
ridge vent clipping geometry, and roof surface placement.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Simplify Dutch roof shape
* Add Dutch roof gable top geometry controls
* Fix Dutch roof slope material slots
* Render dutch roof tops as double-sided faces
* Add auto ridge vent toggle to roof segments
Track ridge vent auto-generation via an `autoRidgeVent` metadata flag so
geometry changes only regenerate default vents when enabled, treating
legacy segments with generated vents as auto-enabled for back-compat.
Expose a panel toggle to opt in/out per segment.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Snap new walls to the floor below
Feed the walls of the level directly beneath the active one into the
draft snap pipeline as extra references, so a new wall can align with
the floor below. They share the same local XZ origin, and the list is
kept separate from the current-level walls so the measurement HUD and
wall splitting only act on the active level.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Set Dutch roof shape defaults on type switch
Seed the Dutch shape parameters (waist width/height/length, top rake
thickness/length) with sensible defaults whenever a segment is created
as or switched to Dutch, so the gablet is well-formed regardless of
leftover values from the previous roof type.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Use green accent for corner and endpoint snap markers
Color the corner/endpoint snap markers and the vertical cursor pillar
green across the 2D floorplan beacon, the 3D alignment guide dots, and
the wall snap beacon so snap targets read as a consistent accent.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Add magnetic wall snapping to the roof tool
Snap roof draft corners onto wall corners, midpoints, crossings, and
bodies on the active level and the floor below, reusing the wall tool's
snap pipeline so the beacon and coloring match. The cursor's ground
dot/ring is hidden while a wall snap is active to avoid overlapping the
beacon glyph.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Update auto-generated Next.js route types path
Regenerated next-env.d.ts now references ./.next/dev/types/routes.d.ts.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Show cutaway outline while dragging roof trim
Slice an untrimmed segment volume generated from the live node instead of
the registry mesh, whose CSG rebuild lags a few frames behind the drag and
may still hold placeholder geometry — so the section outline now renders
deterministically. Use LineBasicNodeMaterial so the outline draws under the
WebGPU pipeline, and export generateRoofSegmentGeometry for the slice source.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Fill and clip roof trim cutaway, gate it to active drag
Add a violet silhouette fill behind the cutaway outline, extend the
section slicing to angled diagonal/corner trims via a generic vertical
cut plane, and clip each slice to its footprint span so the infinite
plane no longer sprouts stray lines across the rest of the roof. The
cutaway now renders only while a trim handle is being dragged.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Separate and extend Dutch roof end slopes
Pull the Dutch hip end slopes out of the watertight shingle shell into
their own slab wedge so they can be reshaped independently, and extend
each end slope inward up its own hip plane until the top edge meets the
gablet's inner triangle. Refactor roof-segment shape geometry into a
shared roof-segment-shape module.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Render roof trim cutaway as a material-only section cut
Replace the triangle-mesh slicer with a CSG intersection of a thin slab
against the untrimmed roof shell, so the cutaway shows red only on real
material (wall + deck bands) and leaves the hollow attic empty. Add an
analytic surface-edge outline, style both solid red like a SketchUp
section, and make the cutaway persist whenever a segment is trimmed.
Keep the merged roof shell visible during trim editing (re-trimmed live
from each segment's drag override) instead of swapping in the per-segment
meshes, whose abutting end-cap faces showed as stray white planes the
commit never had. Extend each slab past free cut-line ends only — trimmed
ends clamp to the cut line — so the red section stays inside the trim box.
Re-export INTERSECTION from the viewer CSG surface for the editor.
* Outline roof cutaway by fill silhouette, restyle to destructive red
Derive the section-cut outline from the fill geometry's edges
(EdgesGeometry) so it traces the real cut shape — wall/deck band
boundaries and the hollow-attic edge — instead of just the top surface
line. Drop the fill to 85% opacity and recolor both fill and outline to
the app's destructive red, matching the delete/destructive UI.
* Include roof accessories in trim clipping and red cutaway
Roof accessories (chimney, vents, skylight, dormer, gutter, downspout,
solar-panel, cupola) now slice at the trim plane like the roof shell and
appear in the red section-cut while dragging a trim handle:
- Export clipGeometryBySegmentTrim from the viewer as a reusable
segment-local trim-clip primitive.
- Add a shared useSegmentTrimClippedGeometry hook + TrimClippedMesh
wrapper (nodes) that slice accessory geometry by the host segment's
live trim override, so the cut tracks the drag.
- Wire the clip into all 11 accessory renderers, including skylight
glass panes and dormer window glass/frame/sill.
- Feed every hosted accessory mesh into the editor's red cutaway, welding
triangle-soup geometry (e.g. ridge vent) so CSG INTERSECTION yields a
cross-section.
- Register skylight in the scene-graph tree-node map so it shows in the
outliner when placed on a roof.
Co-Authored-By: Claude <noreply@anthropic.com>
* Add smooth spline fences with editable curve handles
Fences can now be drawn as one continuous Catmull-Rom/Bezier curve via an
optional `path` (+ per-point `tangents`), selectable in a Straight/Curved
mode toggle. Selected spline fences expose draggable control-point dots
(hexagon) and symmetric tangent handles (circle) joined by a violet line,
editable in both 2D plan and 3D. Side-move arrows are dropped for splines.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix dutch roof ridge vent handling
* Fix Dutch ridge vent placement and support
* Fix Dutch roof trim artifacts
* Fix Dutch roof trim preview geometry
* Tag roof trim overlay meshes with EDITOR_LAYER
Child meshes relied on a parent group's layer, which three.js does not
propagate, so the trim section/rail/plane overlays rendered on the scene
layer — getting inked/SSGI-darkened and leaking into thumbnail exports.
Co-Authored-By: Claude <noreply@anthropic.com>
* Apply Biome cleanup
* fix(core): address Dutch roof review feedback
* chore: apply biome check cleanup
* fix(core): relax Dutch roof surface helper input
* fix
* Fix biome checks and dev verification
* fixes
* Remove unsupported Biome noShadow override
* Improve roof interactions and fence editing
* Fix fence drag and ridge vent default handling
* editor: drop wall-snap debug log, gate curved-fence finish hint on draft start
Remove the leftover TEMP DIAGNOSTIC console.log in the wall tool's onMove
hot path.
Curved fences commit on a closing gesture (double-click / Enter) rather than
per-click, so surface a 'Finish curve' hint in the fence HUD — but only once a
point has been placed and a curve is actually in flight. The draft point count
is published from SplineFenceDraft into a small ephemeral editor store
(useFenceCurveDraft) that the contextual helper reads, mirroring the existing
useSegmentDraftChain pattern.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Wassim SAMAD <wass08@gmail.com>
Implements plans/editor-placement-interaction-overhaul.md: an authoritative
interaction-scope state machine plus the catalogued placement/interaction
fixes, and split-view floor-plan performance.
- Interaction-scope spine (lib/interaction/* + store/use-interaction-scope),
driven from central useEditor setters; overlay scoping (zone labels,
context badges, floating action menu) reads resolveOverlayPolicy.
- Bug tracks A/B/D/E/F/G/H: handle/cutout raycast, footprint validity,
auto-slab loop, ceiling hosting, B-key tool desync, 2D drop offset,
per-frame jank.
- Snapping modes (grid/lines/angles/off) + contextual HUD chips; modifier
model (Shift=cycle, Alt=free place, Ctrl=grid step).
- Item move now tracks the cursor 1:1 (was a laggy per-frame lerp); handle
rig hides during a whole-node move; rotate gizmo advertises Shift=free
rotation in the HUD and hides the move cross while rotating.
- Floor-plan perf: pause live reactivity while in 3D-only view; per-node
geometry cache so only changed nodes rebuild on a drag; hoist wall miters
to a once-per-pass ctx.levelData (O(N^2) -> O(N) on wall/opening drags).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Add roof surface placement support for items
Items (e.g. solar panels) can now be placed on sloped roof surfaces.
The placement system computes euler rotation from the roof surface
normal so items sit flush on the slope instead of going inside.
- Add roofStrategy to placement-strategies with enter/move/click/leave
- Wire roof:enter/move/click/leave events in the placement coordinator
- Add calculateRoofRotation in placement-math using surface normals
- Support full 3D cursor rotation for sloped surfaces
- Items on roofs are parented to the level with world-space rotation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fixed conflict
* feat(duct): ceiling-snap drawing + connected-joint endpoint move
Duct draw tool's ceiling mode now hangs each path point just below the
ceiling actually covering it (per-room heights tracked), with a
translucent surface highlight and a plumb line to the floor so the
in-flight point reads clearly from any angle.
Dragging a duct corner that sits on a fitting now carries the fitting's
other ducts along (port-connectivity second hop), so the joint moves
together instead of tearing apart.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): detach + vertical modifiers for duct/pipe joint editing
Alt detaches a dragged duct/pipe endpoint or fitting from its connected
joint (no elbow re-aim, no connectivity follow); Ctrl/Cmd drives vertical
riser movement on the fitting move. Behavioral parity across 2D and 3D.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): full DWV pipe parity for joint editing
Bring pipe-segment endpoint drags and pipe-fitting moves to parity with
duct: free-drag endpoints, Alt-detach, Ctrl/Cmd-vertical riser, elbow
re-aim, and connectivity follow. Generalizes the shared elbow-reaim and
auto-fitting helpers to dispatch by run kind so 2D and 3D share one path.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): wall-style arrow handles for duct fittings + segments
Add violet directional arrow affordances to duct-fitting selection (height,
move cross, rotate arc) mirroring the duct-segment rig: portaled into the
parent frame to stay out of the selection outline, rendered via the shared
HandleArrow, and carrying mated-run connectivity through the single-undo
dance. The move cross engages press-drag-release (placementDragMode) the same
way the floating drag does, so the markup hit-areas go inert and the fitting
move tool commits on pointer-up.
Also re-export the HandleArrow primitives from @pascal-app/editor and extend
the duct-segment side-move/floorplan affordances.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): click-to-latch cube handles for duct + fitting editing
Replace the hover-reveal / multi-handle selection rigs with a single
click-to-latch cube that opens a directional cluster, shared between
duct segments and fittings via a new selection-handles module
(HandleCube / MoveChevron / RotateArc, all sized to the roof pitch cube).
- Duct segment: per-vertex + run-center cubes reveal axis-locked move
chevrons (down arrow always shown), plus a roll arc at the run center.
- Duct fitting: center cube reveals six ±XYZ move arrows and three
per-axis rotation arcs (oriented in place), replacing the old
height/move/rotate trio with axis-cycling.
- Rotation (fitting arcs + duct roll) snaps to 45° steps; Shift = smooth.
- thin chevron profile + press-drag-release commit retained.
* fix(mep): orient duct roll arc consistently + drop Ctrl-vertical drag
Build a fully-determined basis for the duct roll gizmo so the curved
arrow always seats at the top-outer 45° corner regardless of run
direction, instead of an arbitrary apex from a single setFromUnitVectors.
The selection-rig ±Y arrows now own vertical movement, so the redundant
Ctrl-modifier riser drag is removed from the fitting move tool.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): run-aligned duct handles, swing snapping, elbow flatten
Align the duct run-center cube + horizontal arrows to the run axis
(matching the per-vertex handles) while keeping whole-run translate.
Endpoint side / up-down swing arrows now follow grid snap points and
port-snap onto nearby collars (Shift sweeps smoothly). Relax elbow
realign + fitting schemas to flatten to a straight 0° coupling. Surface
HVAC-specific hints in the select-mode helper panel for duct / fitting.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): per-segment linesets/liquid-lines with joint-follow editing
Linesets and liquid lines now commit one independent two-point node per
drawn segment instead of folding into a single mitered polyline, so each
line selects and deletes on its own. Endpoint caps fill shared-coordinate
joints so connected segments still read as continuous pipe.
Dragging a shared endpoint carries mated segments along via port
connectivity (Alt detaches), so a run still edits as one welded piece.
Liquid-line follow mode traces the whole connected lineset run, laying a
per-segment parallel line down its full assembled length.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mep): vertical-offset auto-routing on duct center-cube ±Y drag
Lifting/lowering a connected run with the run-center cube now keeps each
connected end welded to its stationary partner instead of dragging the
whole network. Run-to-run ends get the classic S/Z offset (two elbows +
plumb riser, partner trimmed back one leg); elbow-connected ends form a
clean L — the existing elbow stays put and re-aims its collar vertical,
with one new top elbow + riser reconnecting to the lifted endpoint. The
offset is ghosted live and minted as a single undo step on release.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Add roof accessory placement guides
Measure roof accessory placement against the active roof face using visible surface bounds and preview geometry footprints. Add dormer-local guides and special linear handling for ridge vents and gutters.
* Improve duct and placement routing
* Fix duct vertical movement routing
* Fix duct vertical offsets and roof accessory movement
* Add DWV movement parity and line endpoint controls
* Fix MEP handle review issues
* Fix chimney placement and duct offset cleanup
* Use snapped targets for roof accessory commits
* fix(nodes): repair MEP movement review issues
- auto-fitting: tee branch now follows the drawn lateral angle; update the
stale square-tee test + doc comment that contradicted the rewrite
- duct-segment: re-enable the vertical auto-offset rewind (the disabled stub
left mintedIds empty, so re-dragging a tagged duct stranded old elbows/risers
and stacked duplicates); remove the dead stub
- duct-segment: strip the stale auto-offset tag on manual corner/roll commits
so the horizontal-move path no longer trusts an out-of-date base
- chimney: resume history before mutating segment children arrays so a
cross-segment move reparents in one tracked transaction (undo stays consistent)
- dormer: align schema test with the new windowSill=false default
* fix: address mep movement review issues
* fix: address follow-up mep review comments
* fix: address additional mep review comments
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: pascal-open-bot <open@pascal.app>
The editor's /icons assets were ~10MB of oversized PNGs (a single
toolbar icon up to 1.4MB). Convert every non-PWA icon to WebP (quality
92) and repoint all /icons/*.png references to .webp across
packages/editor, packages/nodes, and apps/editor. PWA/platform icons
(apple-touch-icon, icon-192, icon-512) stay PNG.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- core: fix layer violation in level-height.ts — extract sceneRegistry
import, replace with optional WallBaseYResolver callback so core stays
pure (no Three.js mesh state); viewer callers pass resolver, headless
callers (MCP/tests) get deterministic node-data-only result
- core: generalise port-connectivity service from duct-only to all
distribution families — match partners by distributionRole ('run' →
endpoint stretch, 'fitting' → rigid follow) instead of hard-coded
duct-segment/duct-fitting type names; add system-compat guard so
cross-system ports (e.g. supply duct vs waste pipe) don't fuse
- editor: fix port-snap rotation bug in move tool — pass preview node
at live rotation into resolvePortSnap so own-port positions reflect
any mid-drag R/T rotation before computing the snap delta
- editor: wire pipe-trap into UI — add to StructureTool union,
MepToolKind, MEP_ITEMS Build-tab tile, and structure-tools action menu
- test: add port-connectivity-pipe.test.ts — 2 tests covering
pipe-fitting → pipe-segment endpoint drag and cross-system isolation
- test: fix stale pipe-auto-fitting.test.ts wye expectation — author
deliberately chose square sanitary-tee for DWV side-taps (documented
in PR description and PipeFittingNode schema); update the one test
that still expected wye to match the implemented behaviour
- nit: fix optional-chain biome warning in validate-dwv.ts
Dual review pass (Claude multi-angle + Codex release-quality). One
correctness fix and the agreed do-now cleanups:
- fix: clone-scene-graph remaps roofSegmentId like wallId in both
clone paths — duplicated scenes/levels kept pointing roof-hosted
children at the original segments.
- extract the settled, stateless roof target/cursor math shared by the
four door/window tools into shared/roof-wall-opening-placement.ts
(resolveRoofWallOpeningTarget + getRoofWallOpeningCursorPose +
worldToSelectedBuildingLocal); tools keep the stateful lifecycle
(drafts, undo/temporal, commit field lists). −199 net lines.
- rename host-generic state: currentWallId→currentHostId,
markWallDirty→markHostDirty (they hold segment ids too); capability
cascadesViaHostSegment→dirtyHandledByOwnSystem (behavior-facing,
before the public API hardens).
- drop getRoofAccessoryKinds from core's public API — its only caller
was the standalone Build tab, which now enumerates the registry
inline with its app-specific filter.
- window move-tool uses the shared stripPlacementMetadataFlags; stale
"segment-local" comment fixed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Openings now host on the walls a roof segment generates — the base
walls under the roof and the coplanar gable/shed/gambrel end faces, so
a window can sit in a gable pediment.
- core: roof-segment-walls.ts models the four vertical faces as 2D
frames (u along face, v height) with convex profile polygons that
mirror the wall volume getRoofSegmentBrushes builds; rect-in-profile
clamping and anchored resize limits via half-plane algebra.
- schemas: optional roofSegmentId on door/window; position is the
segment-local wall mid-plane center, rotation[1] the face yaw.
- cut: reuses capabilities.roofAccessory.buildCut; new cutScope: 'wall'
subtracts from the wall brush only. cascadesViaHostSegment keeps the
roof-merge loop from consuming door/window dirty marks (their own
systems cascade via parentId).
- tools: roof:* handlers in door/window tool + move-tool (the Build-tab
preset path), with roofSegmentId cleared/restored across every
roof<->wall re-anchor and revert; shared hit resolver normalizes
normals through world space (merged mesh vs painted segment frames).
- fix: RoofSystem no longer rebuilds per-segment CSG in accessory-reveal
mode — the uncut rebuild used to draw over the merged shell's fresh
opening until deselect.
- fix: the walkthrough collider world now prunes by renderer-effective
visibility; stale uncut segment CSG inside the hidden segments-wrapper
blocked the player at openings the merged shell had cut through.
Known gap: painted segments render per-segment CSG without accessory
cuts (pre-existing, also affects skylight/dormer). Twice Codex-reviewed;
details in private-editor plans/editor-roof-wall-openings.md.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- registry: getRoofAccessoryKinds() enumerates kinds declaring the
roofAccessory capability, in deterministic builtin-list order (mirrors
getSelectableKinds); exported from the registry barrel.
- apps/editor build-tab: a "Features" group under the Roof tile, discovered
from the registry (no DB) and activating each kind's roof-attach tool —
parity with the community editor's roof features.
- site-boundary-editor: hide the flag handle group around thumbnail captures
(they render on SCENE_LAYER so the thumbnail camera can't layer-filter them),
matching handle-arrow.tsx — keeps flags out of preset/snapshot thumbnails.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* wip sfx
* wip audios
* feat(editor): structure build-start/end cues + menu hover/click SFX
Sound design pass for the build/items experience:
- Split structure-build into a start cue (draft begins) and end cue
(commit). Wall/fence fire start on the first click; slab/ceiling/zone
tick start on every non-closing vertex; roof on the first corner.
- Doors and windows now use the structure-end cue on place + move;
shelves use item-place instead.
- New menu_hover (round-robin retired in favour of a single sample) and
menu_click cues wired to the Build/Items main categories, item-catalog
tiles, the icon rail / tab bar, and the bottom action menu (via the
shared ActionButton).
- Refresh item_pick / item_place / item_rotate samples; drop the
now-unused numbered menu_hover variations.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(editor): silence forEach return lint in updateSFXVolumes
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore(editor): convert SFX wavs to mp3 to shrink assets
Re-encode all SFX samples as 128kbps mp3 (~94% smaller, transparent for
short UI cues) and point the player at the .mp3 sources. Drops the .wav
originals; the freshly converted item_pick/place/rotate.mp3 override the
older committed mp3s.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* fix(nodes,viewer): window preset live wall preview + shaped-cutout move tracking
MoveWindowTool marked the moving window `isTransient` unconditionally, but
WindowSystem only rebuilds the host wall's cutout for non-transient windows —
so a window *preset* (isNew) showed no live hole on the wall and couldn't be
placed consecutively without leaving/re-entering. Guard the transient mark on
`!isNew`, matching MoveDoorTool.
Separately, shaped openings (arch / rounded / `opening`) rebuild their cutout
brush from `node.position`, which a same-wall move doesn't write (it mutates the
mesh directly and publishes to `useLiveTransforms`). The wall-system's
`getEffectiveNode` only merges `useLiveNodeOverrides` (resize arrows), so shaped
cutouts lagged the move while rectangular ones (rebuilt from the live mesh
matrixWorld) tracked. Fold `useLiveTransforms` into door/window children before
collecting cutouts so shaped holes follow the live move too.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(editor,viewer,nodes): smooth item placement on shelves
Three issues made hosting an item on a shelf janky (item-on-item was already
smooth because plain items have no `def.geometry` to rebuild):
- Jitter: the draft mesh intercepted the cursor ray, so the shelf-row hit was
re-derived from the moving item each frame. Disable raycasting on the draft
during placement (incl. async GLB children, reconciled per frame) so the ray
passes through to the surface beneath — mirrors MoveRegistryNodeTool.
- Reparent/vanish at the edges: `onShelfLeave` flipped state to floor without
reparenting the draft off the shelf, so the floor strategy's level-local
position rendered compounded with the shelf transform. The grid handler now
owns the shelf→floor transition.
- In/out oscillation: reparenting the draft onto the shelf dirtied the shelf,
and GeometrySystem disposed+rebuilt its boards, making r3f fire a spurious
shelf:leave→enter that thrashed placement between the row and the floor. Add
an opt-in `def.geometryKey` so GeometrySystem skips the rebuild when geometry
inputs are unchanged (shelf boards don't depend on hosted children). Keep the
item sticky by testing the cursor ray against the shelf's bounding box: a ray
that slips through a gap and lands on the floor behind the shelf still counts
as "on the shelf"; only a ray that misses the shelf detaches to the floor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(editor-app): add Shelf to the standalone editor Build tab
The shelf kind is fully wired (def.tool, presentation icon, StructureTool id)
but was absent from the standalone editor's Build palette. Add it between
Column and Spawn Point. Community has its own build-tab and is left untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore(mcp): biome-format coordinate-conventions-demo.json
The committed example violated Biome formatting (expanded polygon arrays),
which broke the `mcp-ci` Biome check on main (#356) and every branch since.
Format it so CI is green. Pure formatting — no content change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Bring the open-source standalone editor closer to the community editor's
v2 sidebar without pulling in any preset/catalog infrastructure.
- Add a preset-less Build tab (apps/editor) that mirrors the community
Build sidebar: wall, fence, slab, ceiling, roof, stair, elevator,
door, window, column, spawn, plus the material-paint panel. Clicking a
type activates the raw structure tool drawn with the kind's defaults.
- Wire the Build tab into both editor mount points (local + saved scene)
and give the left rail proper image icons (Scene/Build/Items/Settings)
instead of letter fallbacks.
- Gate the ItemsPanel Library/Community/Mine source chips and tag filter
rows behind `showSourceFilter` / `showTagFilters` props (default true,
so community and external consumers are unchanged). The standalone
editor passes both off, leaving plain category tabs + full-width search.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Sudhir Yadav